Battery isolator with removable key in the On or Off positions. Rated 100 amps at 24 volts, 500 amps for 5 seconds. M10 studs and 22.5mm hole. Supplied with 2 keys.Pkt Qty 1

Push button single pole switch, push to momentarily make, screw terminals, 14mm panel hole. 10 amps at 12 volts dc rating.Pkt Qty 1

Push button single pole switch, push to momentarily make, screw terminals, 22mm panel hole up to 8mm deep. 12.5 amps at 12 volts dc rating.Pkt Qty 1

On/off, push-push single pole switch, with 12/24 volt LED indicator and 4.8mm blade terminals. Snap fits into 20mm diameter panel hole. 20 amp at 12 volts / 10 amp at 24 volts dc rating. Black non illuminated.Pkt Qty 1

Push button single pole switch, push to momentarily make, 6.3 Lucar terminals, 20mm panel hole. 10 amps at 12 volts dc rating.Pkt Qty 1

On/off, single pole switch, nickel plated round metal lever with 12/24 volt blue LED indicator, 6.3mm blade terminals. 13mm panel hole. 10 amps at 28 volts dc rating.Pkt Qty 1

Change over or on/off, two position, single pole switch, with nickel plated brass lever and 6.3mm blade terminals, 13mm panel hole. 10 amps at 28 volts dc rating.Pkt Qty 1

Emergency stop button, single pole, normally closed contact. Operated by mushroom push button, turn to reset. Protected to IP 65. Telemecanique reference XAL-K174.Pkt Qty 1

With screw terminals.Pkt Qty 1

Courtesy door switch, 16mm spring loaded plunger with 9.5mm movement. Panel clearance 33mm. Non-corroding copper terminals and fittings. For most modern FordsPkt Qty 1

On/off, single pole switch, nickel plated round metal lever with 12/24 volt green LED indicator, 6.3mm blade terminals. 13mm panel hole. 10 amps at 28 volts dc rating.Pkt Qty 1

Green warning light, 24 volt LED, for push fit into 8.2mm panel hole. Supplied with 300mm leads. Warning - observe polarity, red +ve, black -ve.Pkt Qty 1

Battery isolator with fixed handle. Rated 250 amps at 24 volt and 2500 amps for 5 seconds. M10 studs and requires 30.5mm hole. Replaces Ford / Iveco 4822229.Pkt Qty 1

Battery isolator with removable key, 8mm lock hole and splashproof cover. Rated 250 amps at 24 volts and 2500 amps for 5 seconds. M10 studs and requires 24mm hole.Pkt Qty 1

++Light Design: Bulb - PY21W++Light functions: 1 - with indicator++Appr. stamp: ECE++with bulb/with lamp base++Item Attributes: Fitting Position: right Mounting Type: Bayonet Supplementary Article/Supplementary Info: with lamp base / with bulb Light Design: Bulb Appr. ...

++Attention: Depending on the mounting position, the water drainage opening must be broken out! See assembly instructions. Housing made of black plastic.++�: 122.5mm - Lamp Type: P21W - without bulbs++Light functions: 1 - with indicator++ADR/ GGVS Checked - Appr. stamp: ECE++Housing Colour: Black+...

++Lamp Type: C5W/P21W - without bulbs++Light functions: 2 - with indicator/with position light++Appr. stamp: ECE++Colour: White/Yellow++Item Attributes: Mounting Type: mounting Fitting Position: Right Front / Left Front Supplementary Article/Info 2: without bulbs Appr. stamp...

Marine emergency cut-off switch with lanyard, cut-out can also be operated with lanyard clip in place by pressing knob, suitable for coil or magneto ignition. 6.3mm blade terminals, 16mm panel hole. Rated at 15 amps at 12 volts.Pkt Qty 1

Push button switch, stainless steel button and nickel plated brass body, push to momentarily make, screw terminals, 19mm panel hole. 6 amp at 12 volts dc rating.Pkt Qty 1

On/off, single pole switch, miniature plastic rocker and 4.8mm blade terminals. Snap fits into 15mm diameter panel hole. 6 amp at 12 volts dc rating.Pkt Qty 1